Code: DA0224

Innokin Pebble Starter Kit

£44.99
Click here to review this product

Innokin Pebble Starter Kit

Adorably cute and compact, this Innokin Pebble Starter Kit features a matchbox sized, 50 Watt mod, paired with a TPD compliant, 2ml Slipstream tank. To make life simple, the Pebble mod has a built-in 1300mAh battery, powering basic variable wattage controls. The Slipstream tank’s protective shielding makes this sub-ohm set-up ideal as a ‘take-anywhere’ vape kit for a purse or pocket.

This is currently the smallest starter kit that Innokin produce. A slimmed-down feature set also makes this mid-power e cig kit one of the easiest to use. Just like bigger box mods, the Pebble still has room for a compact OLED display screen. Simple + and – buttons allow you to adjust your vaping power from a minimal 6 Watt setting, right up to a sizzling 50 Watts. Settings in the 20 to 35 Watt range are ideal for vaping with the kit’s sub-ohm, Slipstream tank. The standard 510 connector on the Pebble mod makes it compatible with almost any atomizer having a 510 screw connector – even low wattage, mouth-to-lung atomizers with a cigarette style draw.

The Pebble starter kit’s Slipstream tank has been designed to comply with the 2016, Tobacco Products Directive (TPD regulations). The tank has ‘push-and-turn’ access to the e liquid tank. This is easy for adults to use, but it makes it almost impossible for children to reach the e liquid. The Slipstream tank is built for clean, leak-free operation. Fully adjustable airflow helps you to find the sweet spot for each of your favourite e liquids. Two replaceable sub-ohm coils are provided with the Pebble starter kit. The pre-fitted, 0.8 Ohm coil is ideal for relaxed, contented vaping. The 0.5 Ohm coil shows-off the flavour and cloud potential of lower resistance atomizers.

The Innokin Pebble Starter Kit comes with its own USB cable for internal battery charging. As well as having a battery level indicator on the OLED screen, the Pebble’s fire button lights up with a traffic-light indication of the battery level. When the fire button shows red, stop vaping and plug the Pebble into a USB power source.

Contents:

1 x Innokin Pebble 50 Watt Mod

1 x Innokin Slipstream 2ml Tank

1 x Slipstream 0.8 Ohm Atomizer Coil (Fitted)

1 x Slipstream 0.5 Ohm Atomizer Coil (Spare)

1 x Pack of Spare O Rings

1 x USB Battery Charging Cable

1 x Pebble User Manual

Innokin Pebble 50 Watt Mod Features:

Size: 55mm x 35mm x 22mm

Screw: Standard 510 threaded connector

Positive pin: Sprung, gold-plated

Style: Ultra-small, mid power box mod

Fire button: Push button with LED battery level light

Battery type: Internal, 1300mAh

Variable power: 6 to 50 Watts

Max current output: 15 Amps

Max voltage output: 7.5 Volts

Atomizer resistance range: 0.2 to 3.5 Ohms

Screen: Simple OLED display

Shows Coil resistance, wattage, voltage & battery level

Displays vape timer & puff counter

USB charge port on mod base

Comes with mini/standard USB charge cable

5 Volt, 1 Amp charge capability

Allows vaping during recharge

Three click on/off safety switching

Has 15 sec vape cut-off feature

Built-in low voltage, short circuit & overheating protection

Amazingly simple to use

Compact and fashionable

Available in Gold, Coffee, Dark Blue, Black & White.

Innokin Slipstream Tank Features:

E liquid capacity: 2ml

Tank glass: Protected Pyrex glass tube

Tank protection: Stainless steel shielding with windows

Connector: 510 screw

Fitted with wide bore drip-tip

Spare 510 stainless steel drip-tip included

Adjustable top airflow ring with 3 slots

Push-and-turn child-lock access for refilling & coil changes

Comes fitted with a 0.8 Ohm kanthal atomizer coil (20 to 35W)

Spare 0.5 Ohm stainless steel coil included (20 to 35W)

Spare tank seals included

Leak-free tank design

Easy viewing of remaining e liquid

Stubby, low profile tank

TPD compliant

A safer option for the family home

Ideal for discreet vaping

Innokin Pebble Starter Kit Compatibility:

This Pebble Starter Kit comes with an Innokin Slipstream tank. Replacement atomizer coils for the Slipstream tank can be ordered from our Accessories pages. The Pebble mod can also be used with other low to mid-power atomizers having resistances in the 0.2 to 3.5 Ohm range.

WARRANTY NOTE: IT IS IMPERATIVE TO KEEP ALL PACKAGING AND PAPERWORK IN ORDER TO VALIDATE YOUR WARRANTY SHOULD AN ISSUE ARISE.

Read More

Reviews

There are no reviews for this product yet. Write a review